Filter media will assist in removing waste and keeping the water pure and of the high quality needed by most corals and marine life. It will help remove phosphates and hence the nuisance algae that often occur in the early stages of your tank’s development as it is still establishing itself. It will also help support the nitrogen cycle in your tank. To assist in maintaining water quality, filter media can be
Articles in this section
- Step 1: Connect outlet pipe to pump
- Step 2: Set up the pump.
- Step 3: Install the pump
- Step 4: Install the lower grid plate and inlet/outlet/heater plate.
- Step 5: Install desired filter media into lower media chamber
- 1. Seachem Purigen
- 2. Seachem Sea GelTM
- 3. Seachem PhosGaurd
- 4. Live rock rubble
- Step 6: Install the middle grid/skimmer plate and inlet/outlet/heater/probe plate