Use 100mg sealed mesh bag (typically requires changing every 4 months in the 46l/12g FluvalEdge™) Purigen® controls ammonia, nitrites and nitrates by removing nitrogenous organic waste. It ‘polishes’ the water for good clarity. Purigen® will assist in keeping the high water quality required by some advanced corals. Purigen® darkens progressively as it exhausts.
Articles in this section
- Step 1: Connect outlet pipe to pump
- Step 2: Set up the pump.
- Step 3: Install the pump
- Step 4: Install the lower grid plate and inlet/outlet/heater plate.
- Step 5: Install desired filter media into lower media chamber
- 1. Seachem Purigen
- 2. Seachem Sea GelTM
- 3. Seachem PhosGaurd
- 4. Live rock rubble
- Step 6: Install the middle grid/skimmer plate and inlet/outlet/heater/probe plate