1. Lay the Marine-Pac 3 flat and install the back cover of the rear column as shown in Figure 13.
Articles in this section
- Step 1: Connect outlet pipe to pump
- Step 2: Set up the pump.
- Step 3: Install the pump
- Step 4: Install the lower grid plate and inlet/outlet/heater plate.
- Step 5: Install desired filter media into lower media chamber
- 1. Seachem Purigen
- 2. Seachem Sea GelTM
- 3. Seachem PhosGaurd
- 4. Live rock rubble
- Step 6: Install the middle grid/skimmer plate and inlet/outlet/heater/probe plate